Q uick Star t Guide
SecureLinx Spider Duo
5
W W W.LANTR ONIX.COM
1. Plug the RJ45 end of the included serial cable into the Spider Duo’s serial
port. Plug the DB9F end into the serial (COM) port of a PC/laptop running a
terminal emulation (e.g. HyperTerminal). The default serial port settings are
9600 bits per second, 8 data bits, no parity, 1 stop bit, no flow control.
Plug the power adaptor into the Spider Duo’s power connector.
2. Insert color coded plugs into connectors with matching border on the Spider
Duo. Plug the Video, USB, and PS/2 keyboard/mouse (if applicable) cables
into the target computer. For transparent local access, connect cables to
local keyboard, video and mouse. The blue Sys OK LED will illuminate and
flashes to indicate that it is booting up. Bootup is complete within
approximately one minute. The blue LED stops flashing and remains
illuminated.
3. Upon bootup, the terminal window displays the IP Configuration screen.
At the command prompt type config and press Enter.
4. To change the default IP auto configuration from DHCP to a static IP address,
at the IP autoconfiguration prompt type none and press Enter.
INSTALLATION AND NETWORK SETTINGS CONTINUED