Lantronix SecureLinx SLK Series, Руководство пользователя

Страница: 69 / 160

Using the Web Control Interface to Configure the SLK
SecureLinx SLK Remote KVM User Guide 4-23
Setting Up User Accounts
The User Account link allows the administrator to specify users, assign permis-
sions, and allocate access (see
Figure 4-13 ). User accounts must be defined before
remote (web) sessions are available.
Figure 4-13. User Accounts Page
The User Accounts page lets you:
❖
Change the master account password.
❖
Define user accounts (normal or administrator).
❖
Set user names, passwords, and flags.
❖
Select the servers that users can access and not access (available on SLK 8
an
d SLK16).
Changing the Master Account Password
The master account password is the password you enter to perform Administrator
activities using the web control interface. The default password is
PASS . For secu-
rity purposes, we recommend you change it. This step should have been completed
during the initial configuration of the SLK. If not, or if you want to change it again,
perform the following procedure.
1 In the menu pane, click User Accounts under Configuration . The User
Accounts page appears.
2 Under Master Account Password , type the new master account password in
the left field; then retype it in the right field (see Figure 4-14 ).