manualshive.com logo in svg

Lantronix SCS1600, Руководство пользователя

Поделиться
Скачать
Lantronix SCS1600 Скачать руководство пользователя страница 25

SCS1600/3200 User Guide 

4: Application Setup 

For a single global menu, the system administrator defines menus using the menu 
configuration web page. For multiple, group, or nested menus, the system administrator 
defines menu text files and uploads them to the SCS.  For more information on defining 
menus, see the 

SCS Reference Manual

. 

Creating the Menu 

Create a menu with the web browser interface by performing the following steps:  
1. Click 

the 

Menu

 link under the Quick Setup options.  

Menu Settings 

 

 

2.  Enter a title for your menu in the 

Title

 field.  

3.  Create menu entries by entering a description, which will be displayed in the menu, 

and a corresponding command that will be run when that entry is selected.  

Each menu entry can do 

one

 of the following:  

 

Connect to a device on the network using a Telnet

 

command. 

Telnet Menu Entry 

 

 

Connect to a device attached to the SCS with a 

Connect Local Port

 command. 

The port is the port name listed in the SCS, such as port_2. 

4-3 

Содержание SCS1600





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды