Lantronix
S3100 Install Guide
33581 Rev. C
Page 12 of 19
Operation
Power and Fiber Status LEDs
The status LEDs (labeled
PWR
and
LINK
are shown below. Use the status LEDs to monitor S3100
operation in the network.
Figure 7: Power and Fiber Status LEDs
The Power and Fiber Status LEDs are described below.
LED Label
Meaning
Operation
PWR
Power
Green ON for power applied to board.
PORT 1
LINK LED
SDF Fiber Status 1
On = Fiber Signal Detected.
Off = Fiber Signal Not Detected.
PORT 2
LINK LED
SDF Fiber Status 2
On = Fiber Signal Detected.
Off = Fiber Signal Not Detected.
