10: Network Services
PremierWave® EN Embedded System on Module User Guide
96
SMTP Settings
Table 10-9 SMTP Settings
To Configure SMTP Settings
Using Web Manager
To configure SMTP protocol settings, click
SMTP
in the menu.
Using the CLI
To enter the command level:
enable -> config -> smtp
Using XML
Include in your file:
<configgroup name=”smtp”>
Email Settings
View and configure email alerts relating to events occurring within the system.
Table 10-10 Email Configuration
SMTP Settings
Description
From Address
Enter the From Address here. This is an email address and is required. If you wish
to direct outbound email messages through a mail server, put your client email
address here.
Server Address
Enter the Server Address to direct outbound email messages through a mail
server.
Server Port
Enter the SMTP server port number. The default is 25
Username
Enter a Username to direct outbound email messages through a mail server.
Password
Enter a Password to direct outbound email messages through a mail server.
Overriding Domain
Enter the domain name to override the current domain name in EHLO (Extended
Hello).
Email – Configuration
Settings
Description
From
Click the
Configure SMTP
link to configure SMTP. See
To
Enter the email address to which the email alerts will be sent. Multiple addresses
are separated by semicolon (;). Required field if email is to be sent.
CC
Enter the email address to which the email alerts will be copied. Multiple addresses
are separated by semicolon (;).
Reply To
Enter the email address to list in the Reply-To field of the email alert.
