Connecting a PremierWave Device—Network Method
PremierWave Evaluation Board Quick Start
7
5. Select the appropriate power plug adaptor for your geographical location. Insert it into the slot
on the Universal Power Supply; then plug the power supply into an outlet.
6. Connect the output plug of the power supply to the PremierWave Evaluation Board.
7. Move the power switch on the Evaluation Board to
ON
. This is the last step in 'connection.'
The PremierWave is ready for configuration.
8. Continue with
Install DeviceInstaller on page 8
Option 3: Wireless connection via Wireless card (factory default)
.
1. Ensure the wireless card is running correctly. Change the wireless card configuration as
follows:
a. Set Network name (SSID) to
Lantronix Initial Adhoc Network
.
b. Select
AdHoc/Peer-to-Peer Mode
network.
c. Disable all wireless security (no encryption, no/open authentication).
2. Select the appropriate power plug adaptor for your geographical location. Insert it into the
slot on the Universal Power Supply; then plug the power supply into an outlet.
3. Connect the output plug of the power supply to the Evaluation Board. The final setup should
look like this:
4. Move the power switch on the Evaluation Board to
ON
. This is the last step in 'connection.'
The PremierWave is ready for configuration.
5. Continue with
Install DeviceInstaller on page 8
.
