PremierWave® 2050 802.11ac Embedded Wi-Fi® User Guide
21
4: Configuration Using Web Manager
This chapter describes how to configure the PremierWave 2050 gateway using Web Manager, the
Lantronix browser-based configuration tool. The
gateway
’s configuration is stored in non-volatile
memory and is retained across
gateway
reset and during loss of power to the
gateway
. All changes
take effect immediately, unless otherwise noted. This chapter contains the following sections:
Accessing Web Manager
Web Manager is normally accessed through a standard web browser but you can also access
Web Manager in two other ways. See
Chapter 3: Using DeviceInstaller on page 18
for additional
information on accessing Web Manager through the DeviceInstaller Web Configuration tab. See
the
PremierWave 2050 802.11ac Embedded Wi-Fi Gateway Quick Start Guide
for instructions on
accessing Web Manager through SoftAP. The quick start guide is available at
www.lantronix.com/
support/documentation
.
To access Web Manager through a web browser:
1. Open a standard web browser. Lantronix supports the latest versions of Internet Explorer®,
Firefox®, Safari®, or Chrome™ web browsers.
2. Enter the IP address or host name of the PremierWave 2050 gateway in the address bar. The
IP address may have been assigned manually using DeviceInstaller (see
Chapter 3: Using DeviceInstaller on page 18
) or automatically by DHCP.
3. Enter your username and password. The factory-default username is “
admin
” and “
PASS
” is
the default password. The Status web page (see
) displays current configuration
and status details for the
gateway
, network and line settings.
