Lantronix PremierWave 2050, Руководство по интеграции

Страница: 14 / 30

2: Functional Description
PremierWave® 2050 Through-Hole Adapter Integration Guide 14
Figure 2-3 PremierWave 2050 (PW20503) Pin Locations in mm (inch)
Antenna Interface
The PremierWave 2050 module has been certified using the external antennas listed below. Per
FCC guidelines, the PremierWave 2050 Wi-Fi certification remains valid if using an antenna of
similar type to the antennas below. If using an antenna of similar type to one of the antennas
below, but from a different manufacturer part number the antenna gain must be equal to or less
than specified in the table. Refer to the PremierWave 2050 802.11ac Embedded Wi-Fi Gateway
Datasheet , available at www.lantronix.com/support/documentation , for full compliance
instructions and information. Consult with your certification lab for more details.
Table 2-3 PremierWave 2050 External Antenna Options
Antenna Type Peak Gain
Typical
Lantronix
Part
Number
Vendor Vendor
Part
Number
Approved
Region
PCB Strip Antenna
with 50 mm cable to
U.FL connector
With tape backing
2.5dBi, 2.39 GHz
to 2.49 GHz
5 dBi, 4.9 GHz to
5.9 GHz
XPW100A003
-01-B
50 piece bulk
pack
Ethertronics 1001077 FCC, IC, EU,
AUS/NZS,
JPN, China,
Mexico
PCB Strip Antenna
with 50 mm cable to
U.FL connector
Without tape
backing
2.5dBi, 2.39
GHz to 2.49 GHz
5dBi, 4.9Ghz to
5.9Ghz
Ethertronics 1000668 FCC, IC, EU,
AUS/NZS,
JPN, China,
Mexico
Swivel type antenna,
with RP-SMA(M)
connector
2 dBi, 2.4 GHz to
2.5 GHz, 2 dBi,
5.15 GHz to 5.85
GHz
930-033-R-
ACC
50 piece bulk
pack
Wanshih WSS002 FCC, IC, EU,
AUS/NZS,
JPN, China,
Mexico
Swivel type antenna,
with RP-SMA(M)
connector
3.8 dBi, 2.4Ghz
to 2.5Ghz,
5.5 dBi, 4.9 GHz
to 5.8Ghz
Taoglas GW.71.5153
(Not for EU
use)
FCC, IC,
AUS/NZS,
JPN, China,
Mexico
PremierWave 20503