5: Network Settings
PremierWave® 2050 802.11ac Embedded Wi-Fi® User Guide
37
Using XML
Include in your file:
<configgroup name=”ip”>
ICMP Settings
This page contains lower level ICMP Network Stack specific configuration items.
Table 5-8 ICMP Protocol Stack Settings
To Configure ICMP Protocol Stack Settings
Using Web Manager
To configure ICMP protocol settings, on the
Network
page, click
Protocol Stack
>
ICMP
.
Using the CLI
To enter the command level:
enable > config > icmp
Using XML
Include in your file:
<configgroup name=”icmp”>
ARP Settings
This page contains lower level ARP network stack specific configuration items.The ARP cache can
be manipulated manually by adding new entries and deleting existing ones. Added entries are
static and for test purposes only.
Table 5-9 ARP Protocol Stack Settings
To Configure ARP Network Stack Settings
Using Web Manager
To configure ARP protocol settings, on the
Network
page, click
Protocol Stack
>
ARP
.
Protocol Stack ICMIP
Settings
Description
State
The State selection is used to turn on/off processing of ICMP messages.
This includes both incoming and outgoing messages. Choose
Enabled
or
Disabled
.
Protocol Stack ARP
Settings
Description
IP Address
Enter the IP address to add the ARP cache.
MAC Address
Enter the MAC address to add to the ARP cache.
Interface
Select the type of interface if adding to the ARP cache.
Add (button)
Click this button to add a new entry (after entering the IP address, MAC
address and Interface info for the new entry above.)
Clear
Click the
Clear
link above all listed addresses to remove all the addresses.
Remove
Click the
Remove
link beside a specific address to remove it.
