Lantronix MSS4-D, Руководство по установке

Страница: 69 / 95

Using the MSS COM Port Redirector
5-15
When using an MSS serial port in modem mode:
◆ The serial device’s DTR goes out to BOTH its own DSR in and the MSS DSR in.
When the device asserts its DTR, it will see its DSR asserted. That way the device
thinks that the “modem” (the MSS) is ready to accept commands all the time and the
MSS can close the network connection when the device disconnects.
◆ The MSS DTR out goes to the serial device’s CD in. That way the MSS can signal
the serial device that there is a valid connection, and the serial device will know it
can send data to the remote device.
5.8 COM Port Redirector
The Lantronix Com Port Redirector application allows PCs to share modems and other
serial devices connected to an MSS using Microsoft Windows applications.
The Redirector intercepts communications to specified PC COM ports and sends them over
a network connection to one of the MSS serial ports. This enables the PC to use an MSS
serial port as if it were one of the PC COM ports.
Note:
The redirector works over 802.11 connections.
The COM Port Redirector software is included on the distribution CD-ROM.