manualshive.com logo in svg

Lantronix MSS1-T, Справочное руководство

Поделиться
Скачать
Lantronix MSS1-T Скачать руководство пользователя страница 69

Commands

Change Flow Control

6 - 9

6.15    Change Flow Control

Sets the type of flow control to be used on the port. 

Restrictions

Requires privileged user status.

Does not apply to the MSS485.

Parameters

CTSRTS
Hardware flow control is used.

None
Flow control is not used.

SlowCTS
A less aggressive method of hardware flow control is used in which the 
MSS flow-controls the sender sooner than it would when using CTS/RTS 
flow control. SlowCTS allows the MSS to reliably communicate with 
devices that implement CTS/RTS flow control in software, and therefore 
cannot respond to changes in the same way as true hardware flow 
control.

XONXOFF
Software flow control is used.

Default

XONXOFF

6.16    Change Forward Switch

Defines a key that will switch the user to the next session without entering local mode. From local 
mode, the key functions as if the Forward command was entered. Any key can be specified unless 
it conflicts with MSS line editing, Break, or Backward keys, or keys used by remote operating 
systems. 

Restrictions

Requires privileged user status.

Parameters

character
Type a character to serve as the switch key. To specify a control character, 
precede it with a caret (^).

None
Clears the previously-defined Forward Switch key.

Default

No switch is configured

See Also

Change Backward Switch, page 6-4; Change Break, page 6-5; Change 
Local Switch, page 6-14; Forward, page 6-27.

CHANGE FLOW CONTROL  

CTSRTS

NONE

SLOWCTS

XONXOFF

CHANGE FORWARD SWITCH 

character

NONE

Содержание MSS1-T






















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды