manualshive.com logo in svg

Lantronix MSS1-T, Справочное руководство

Поделиться
Скачать
Lantronix MSS1-T Скачать руководство пользователя страница 64

Change Autostart

Commands

6 - 4

6.5    Change Autostart

Configures whether the port will wait for a Carriage Return before starting a connection. If 
enabled, the port will start automatically.

Restrictions

Requires privileged user status.

Errors

A port enabled for autostart will not be idle unless DSR is held low, and 
therefore will not be available for connections from the network.

Parameters

Character
Sets a character that will cause a login event so that users do not have to 
hit Return or configure Autostart Enabled for an extended period of time.

x
Enter the desired alphanumeric character.

Default

Disabled

6.6    Change Backward Switch

Defines a key that will switch the user to a previous session without entering local mode. From 
local mode, the key functions as if the Backward command was entered. Any key can be specified 
unless it conflicts with MSS line editing, Break, or Forward keys, or keys used by remote operating 
systems. 

Restrictions

Requires privileged user status.

Parameters

character
Specifies a character to serve as the switch key. To specify a control 
character, precede it with a caret (^).

None
Clears any previously-defined Backward Switch key.

Default

No switch is configured

See Also

Backward, page 6-2; Change Break, page 6-5; Change Forward Switch, 
page 6-9; Change Local Switch, page 6-14; Forward, page 6-27.

CHANGE AUTOSTART 

DISABLED

ENABLED

CHARACTER X

CHANGE BACKWARD SWITCH 

character

NONE

Содержание MSS1-T






















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды