manualshive.com logo in svg

Lantronix MSS1-T, Справочное руководство

Поделиться
Скачать
Lantronix MSS1-T Скачать руководство пользователя страница 63

Commands

Change Access

6 - 3

6.3    Change Access

Specifies which types of connections the serial port will accept. 

Restrictions

Requires privileged user status.

Errors

Autobaud must be disabled for Dynamic and Remote ports (see Host 
Applications on page 5-3).

Parameters

Local
Allows the port to initiate connections to services, and permits only local 
logins.

Remote
Allows the port to accept network connection requests, but does not 
permit local logins.

Dynamic
Allows the port to initiate and receive connections.

Defaults

Dynamic

See Also

Change Autobaud, page 6-3.

6.4    Change Autobaud

Allows the port to detect the baud rate used for an incoming connection and then change its own 
baud rate at login time to match that of the remote device. Incoming carriage returns help the MSS 
decide the proper speed. 

Restrictions

Requires privileged user status.

Does not apply to the MSS485.

Errors

Autobaud must be disabled for Dynamic and Remote port access (see 
Host Applications on page 5-3).

Autobaud only works for 8 bits with no parity, or for 7 bits with Even 
parity.

Default

Disabled

CHANGE ACCESS 

LOCAL

REMOTE

DYNAMIC

CHANGE AUTOBAUD 

DISABLED

ENABLED

Содержание MSS1-T






















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды