Lantronix LPS1-2 Скачать руководство пользователя

Страница: 65 / 74

Frequently-used Commands

Protocol Commands

F-7

F.4 Protocol Commands

In the following table, PROTO is an abbreviation for the optional keyword PROTOCOL.

Table F-3: Protocol Commands

Command

Option(s)

Description

DEFINE PROTO
APPLETALK option

{EN/DIS}

Enables or Disables the AppleTalk protocol for
the MPS.

ZONE newzone

Places the MPS in a zone other than the default.

DEFINE PROTO IP
option

{EN/DIS}

Enables or Disables the TCP/IP protocol for the
MPSMPS.

GATEWAY ipaddr

See DEFINE SERVER GATEWAY ipaddr.

IPADDRESS ipaddr

See DEFINE SERVER IPADDRESS ipaddr.

LOADHOST ipaddr

See DEFINE SERVER LOADHOST ipaddr.

NAMESERVER ipaddr Specifies the IP address of the host that will

resolve text host names into their numeric equiva-
lents for TCP/IP connection attempts.

DEFINE PROTO
LANMAN option

{EN/DIS}

Enables or Disables the LAN Manager protocol
for the MPS.

DEFINE PROTO LAT
option

{EN/DIS}

Enables or Disables the LAT protocol for the
MPS.

LICENSE string

Enables LAT on multi-port MPS’s. Enter the
license string obtained from Lantronix.

DEFINE PROTO
NETWARE option

{EN/DIS}

Enables or Disables the NetWare (IPX) protocol
for the MPS.

DSCONTEXT string

Configures the NetWare Directory Services con-
text in which the MPS is located. For more infor-
mation about NDS contexts, see your NDS
documentation.

DSLICENSE string

Configures the NetWare Directory Services
license needed to enable NDS on your MPS.
Enter the license string obtained from Lantronix.

DSTREE string

Configures the NetWare Directory Services tree
in which the MPS is located. For more informa-
tion about NDS trees, see your NDS documenta-
tion.

Содержание LPS1-2











































































Результаты поиска

Содержание LPS1-2

Отзывы:

Похожие инструкции для LPS1-2

Бренды по названию

Популярные бренды

Lantronix LPS1-2, Руководство по установке

Результаты поиска

Содержание LPS1-2

Отзывы:

Похожие инструкции для LPS1-2

Бренды по названию

Популярные бренды