Lantronix
ION001-A Install Guide
33419 Rev. E
7
Grounding Method
The conductor must be fastened to the grounding lugs with the enclosed antirotation star-washers and
lug-nut fasteners. The torque requirement for the connector lug-nut fasteners is specified by the
connector’s manufacturer. To properly ground the single-slot chassis:
1.
Obtain one (1) two-hole, compression-type, grounding connector.
2.
Attach the grounding conductor to the chassis by placing the two-hole connector onto the
grounding lugs and fasten with the enclosed lock washers/lug-nuts at the proper torque (per the
manufacturer’s specification).
3.
Attach the opposite end of the grounding conductor to the common-bonding network (CBN) for
telecom, or to earth ground (if required) for non-telecom installations.
Specifications
For Lantronix Model ION001-A Single Slot chassis or equivalent.
Note:
The ION001-A Single Slot chassis
is Class A compliant.
Status LEDs
None, Power indicator is on the slide-in card
Dimensions
Width: 4" [102 mm] W x 7.1” [180 mm] D x 1.2” [30.48 mm] (H)
Power Supply
External AC/DC power supply included, 120-240VAC input, 12VDC Output
(See selected Slide-In Card manual for power consumption data)
Operating Temp.
0°C to 50°C
Storage Temp.
-40°C to +85°C
Humidity
5% to 95% (non-condensing)
Altitude
0 – 10,000 ft.
Weight
2 lbs. [0.9 kg]
Compliance
UL listed, EN55022, EN55024, CE Mark, FCC Class A, CISPR Class A
MTBF
With Power Supply:
•
191,800 hours (MIL-HDBK-217F)
•
527,500 hours (Bellcore7 V5.0)
Without Power Supply:
•
5,600,000 hours (MIL-HDBK-217F)
•
15,500,000 hours (Bellcore7 V5.0)
Warranty
Lifetime
