G520 LTE Connectivity Kit Quick Start Guide
WHAT’S IN THE BOX
G520 Series
(G526GP1AS1)
2. INSTALLING THE SIM CARD(S) & ANTENNA
1. HARDWARE OVERVIEW
Antenna
RJ45 to RJ45 CAT5
AC Power Supply
The Ethernet connection will be used to attach to your SLC 8000 Console Manager or SLB Branch Office Manager.
1
2
3
Remove the SIM card from its packaging. Locate the SIM
1 slot on the unit. To insert the SIM card, slide the latch for
SIM 1 slot to the left and gently push the SIM card (contact
side down) all the way into the slot. Release the latch.
Note:
The SIM card is pre-activated by Lantronix, but the APN
may need to be configured in the software. See Quick Setup.
Attach the cellular / GNSS antenna to the antenna connectors.
4
5
Connect the power cord to the power supply. Attach
the 3-pin plug on the power cord to the DC input on
the unit. Connect the AC plug on the power supply to a
standard AC receptacle.
Observe that the Power LED is lit.
Wi-Fi /Bluetooth
DC input
Wi-Fi
Ethernet (LAN,
WAN/LAN #2)
LEDs
SIM 1
SIM 2
Cellular
main
Cellular
diversity
GNSS
Front View
Back View
LEDs
Alert
Red
Device alerts
User
Programmable 1
Blue
So ware con
fi
gurable
User
Programmable 2
Blue
So ware con
fi
gurable
Ac vity
Amber
Cellular data ac vity
Network
Amber
Cellular network status
Signal
Amber
Cellular signal strength
SIM
Blue
SIM in use
Wi-Fi
Blue
Wi-Fi network status
Power
Green
Power On or O
ff
The Lantronix G520 series (G52x) gateway must be
configured before it can be used as the fail-over gateway.
The default admin user password must be changed to a new
password, and the DHCP server must be disabled. Please see
G520 User Guide for more information on how to change the
password.
NOTE: For full information on G520 series gateway setup, see the G520 Quick Start Guide.
*No RS-485 serial port available
