Lantronix EPS1 Скачать руководство пользователя страница 26

Страница: 26 / 74

LPR Printing

TCP/IP Configuration

4-10

The Add Remote Printer window will appear. SAM will prompt you for:

❍

The printer name (the name of the print queue),

❍

The remote system name (the EPS name),

❍

The remote printer name (the EPS service),

❍

The remote cancel model, and

❍

The remote status model.

4.2.6 LPR on SCO UNIX Hosts

LPR is supported in SCO V3.2 release 4 with TCP/IP Version 1.2 and greater.

To configure a print queue using LPR, issue the mkdev rlp command. This will install the
Berkeley remote printing files and executable programs.

Note:

The mkdev rlp command should only be issued once, or serious prob-
lems will occur. If this happens, contact SCO technical support.

You can print to this queue using normal lp syntax once the remote printer is set up. To
create a remote printer:

Issue the rlpconf command.

Содержание EPS1











































































Результаты поиска

Содержание EPS1

Отзывы:

Похожие инструкции для EPS1

Бренды по названию

Популярные бренды

Lantronix EPS1, Руководство по установке

Результаты поиска

Содержание EPS1

Отзывы:

Похожие инструкции для EPS1

Бренды по названию

Популярные бренды