Lantronix EMG 8500 Скачать руководство пользователя

Страница: 283 / 416

EMG™ Edge Management Gateway User Guide

283

14: Maintenance

The system administrator performs maintenance activities and operates the EMG using the

options for the Maintenance tab and additional commands on the command line interface.

Firmware & Configurations

The Firmware & Configuration page allows the system administrator to:



Configure the FTP, SFTP, or TFTP server that will be used to provide firmware updates and

save/restore configurations. (TFTP is only used for firmware updates and configurations

restored via DHCP/TFTP .)



Set up the location or method that will be used to save or restore configurations (Local Disk,

FTP, SFTP, NFS, CIFS, USB, HTTPS or SD card). Update the version of the firmware running

on the EMG unit.



Save a snapshot of all settings on the EMG device (save a configuration).



Restore the configuration, either to a previously saved configuration, or to the factory defaults.



Configurations can also be pushed to the EMG via the

HTTPS Push Configuration Restore

feature.

HTTPS Push Configuration Restore

The HTTPS Push Configuration feature allows a saved configuration to be pushed to a EMG via a

command line tool such as "curl" that includes the configuration to upload:

% curl --insecure --request POST --form "file=@/home/users/admin/

current-emgcfg.tgz" ‘https://myemg.company.com/

cfgupdate.htm?login=sysadmin&password=PASS&config=all&comment=FirmwareUp

date’

The arguments that are passed with the URL are:



login

- Login token to use for authentication. This must be a local user with firmware/config

and reboot/shutdown rights.



password

- Clear text password for the login token.



config

- Indicates the portion of the configuration to restore, either all, or any combination of

the following separated by commas: network, datetime, services, localusers, devports, usb,

rpms, remoteauth, connections, events, ipfilter, groups, hostlist, nfscifs, maintenance, sites,

scripts, slcnetwork, consoleport, menus, sshkeys, or sslcerts.



comment

- optional comment to include in the system log and audit log. If spaces are included

in the comment they should be URL encoded as shown in this bash script:

#!/bin/bash

url="https://myemg.company.com/

cfgupdate.htm?login=sysadmin&password=PASS&config=all&comment=Update

myemg.company.com with default configuration"

Содержание EMG 8500

































































































































































































































































































































































































































Результаты поиска

Содержание EMG 8500

Отзывы:

Похожие инструкции для EMG 8500

Бренды по названию

Популярные бренды

Lantronix EMG 8500, Руководство пользователя

Результаты поиска

Содержание EMG 8500

Отзывы:

Похожие инструкции для EMG 8500

Бренды по названию

Популярные бренды