manualshive.com logo in svg

Lantronix DeviceLinx Xchip Direct SoC, Руководство пользователя

Поделиться
Скачать
Lantronix DeviceLinx Xchip Direct SoC Скачать руководство пользователя страница 17

3: Using DeviceInstaller 

 

 
DeviceLinx™  XPort Direct/XChip Direct SoC User Guide 

17 

1.  Follow the instructions above to locate the XPort Direct.

 

2.  In the right pane, click the 

Device

 

Details

 tab. The current XPort Direct 

configuration displays.

 

Name 

Configurable field. A name that identifies the XPort Direct. 
Double-click the field, type in the value, and press 

Enter

 to 

complete. This name is not visible on other PCs or laptops 
using DeviceInstaller. 

Group 

Configurable field. A group name to categorize the XPort 
Direct. Double-click the field, type in the value, and press 

Enter

 to complete. This group name is not visible on other 

PCs or laptops using DeviceInstaller. 

Comments 

Configurable field. Information about the XPort Direct. Double-
click the field, type in the value, and press 

Enter

 to complete. 

This description or comment is not visible on other PCs or 
laptops using DeviceInstaller. 

Device Family 

Non-configurable field. Displays the XPort Direct’s device 
family type as XPort. 

Type 

Non-configurable field. Displays the device type as XPort 
Direct. 

ID 

Non-configurable field. Displays the XPort Direct’s ID 
embedded within the box. 

Hardware Address 

Non-configurable field. Displays the XPort Direct’s hardware 
(or MAC) address. 

Firmware Version 

Non-configurable field. Displays the firmware currently 
installed on the XPort Direct. 

Extended Firmware 
Version 

Non-configurable field. Displays the full version nomenclature 
of the firmware. 

Online Status 

Non-configurable field. Displays the XPort Direct’s status as 
online, offline, unreachable (the XPort Direct is on a different 
subnet), or busy (the XPort Direct is currently performing a 
task). 

Telnet Enabled 

Non-configurable field. Permits Telnet sessions. 

Telnet Port 

Non-configurable field. Displays the XPort Direct’s port for 
Telnet sessions. 

Web Enabled  

Non-configurable field. Displays

 False

. 

Maximum Baud Rate 
Supported 

Non-configurable field. Displays the XPort Direct’s maximum 
baud rate. 

Note:

 The XPort Direct may not be running at this 

rate.

 

Firmware Upgradeable 

Non-configurable field. Displays 

True

, indicating the 

 XPort Direct’s firmware is upgradeable as newer version 
become available. 

IP Address 

Non-configurable field. Displays the XPort Direct’s current IP 
address.  

Number of COB 
partitions supported 

Non-configurable field. Displays the number of COB partitions 
supported. 

Supports Dynamic IP 

Non-configurable field. Indicates whether the current IP 
address on the XPort Direct was set manually or assigned by 
DHCP. 

Содержание DeviceLinx Xchip Direct SoC































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды