Lantronix
CWDM-xxxxxCR-B Mux/Demux User Guide
33794 Rev. B
https://www.lantronix.com/
Page 10 of 19
Rack Mount Install Procedure
The CWDM modules install into the optional CWDM-MB19R2 Rack Mount chassis for installation in a free-standing rack.
To install the bracket and CWDM module into a rack, do the following:
1. Locate the CWDM module and bracket. See Figure 3.
Figure 3: Bracket and CWDM Module
2. Mount the Bracket to the equipment rack, using four screws as shown in Figure 4.
Figure 4: Bracket Installation
3. Pull the CWDM mounting plungers fully out, as shown in Figure 5.
4. Slide the CWDM module into one of the slots, as shown in Figure 5.
Figure 5: Slide CWDM Module into Front of Bracket
