82
Radius Server IP:
Set the Radius Server IP address.
Server Port:
Set the UDP destination port for authentication requests to the
specified Radius Server.
Accounting Port:
Set the UDP destination port for accounting requests to
the specified Radius Server.
Shared Key:
Set an encryption key for use during authentication sessions
with the specified radius server. This key must match the encryption key used
on the Radius Server.
NAS, Identifier:
Set the identifier for the radius client.
And then, click
Apply
button.
802.1x Configuration—System Configuration interface
Per port Configuration
Select the port in
Port
column
Select the state of port:
¾
Reject:
The specified port is required to be held in the unauthorized state.
¾
Accept:
The specified port is required to be held in the Authorized state.
¾
Authorized:
The specified port is set to the Authorized or Unauthorized state
in accordance with the outcome of an authentication exchange between the
Supplicant and the authentication server.
¾
Disable:
When disabled, the specified port works without complying with
802.1x protocol.
Содержание LPES-2224C
Страница 54: ...47 mode sntp timezone value Global configuration mode Set time zone Switch config sntp timezone 8 ...
Страница 79: ...72 And then click Next will see the page as below ...
Страница 102: ...95 VCC 1 1 VCC VCC 2 2 VCC VCC 3 3 VCC VCC 6 6 VCC MDI X MDI w bridge circuit ...
Страница 105: ...98 EMI FCC Class A CE Safety UL cUL CE EN60950 ...
