25
the client/switch boots and the lease is 50% or more passed, the client/switch will
attempt to renew the lease. At 87.5% of the lease completion, the client/switch will
attempt to contact any DHCP server for a new lease.
DHCP Enable:
Tick the check box to enable DHCP Client Function.
Fallback IP Address:
Assign the switch IP address (The default IP is 192.168.16.1)
Fallback Subnet Mask:
Assign the switch IP Subnet Mask.
Fallback Gateway:
Assign the switch Gateway (The default value is
192.168.16.254).
TFTP Server Enabled:
Tick this check box to enable the TFTP server function.
Management VLAN (1 ~ 4094):
Assign a number of VLAN group between 1 and
4094. It is used for Remote Management Security; in fact, it gives the permission to
access the switch only when the port of VLAN group ID is equal to the Management
VLAN ID
Name:
Assign the name of the switch.
Password:
Web GUI login password. The default password is
root
.
Inactivity Timeout:
Set the timeout period for security in number between 60 and
10000 seconds. It means will not logout when set 0.
And then, click
Apply
to have the configuration taken effect.
Or, click
Refresh
to reset the configuration before applying.
6.5 Console Info
This page displays the related information of the console port settings which you have
set in the Console Management segment.
6.6 Port Statistics
The following information provides the current port statistics
Press
Clear
button to clean all counts.
