Lantech LES-2400-RPS, Руководство пользователя

Страница: 5 / 99

1
1. Introduction
The 3-slot Modularized Fast Ethernet L2 plus + 2 Gigabit Copper / Mini-GBIC Combo
Managed Switch is a modular Ethernet switch that can be used to build
high-performance switched workgroup networks. This switch is a store-and-forward
device that offers low latency for high-speed networking. The Switch is targeted at
workgroup, department or backbone computing environments.
The 3-slot Modularized Fast Ethernet L2 plus + 2 Gigabit Copper / Mini-GBIC Combo
Managed Switch
features a ―store-and-forward‖ switching scheme. This allows the
switch to auto-learn and store source address in an 8K-entry MAC address table.
MDI (Medium Dependent Interface) Port is also called an "uplink port". The MDI port
does not cross transmitting and receiving lines, which is done by the regular ports
(MDI
-X
ports) that connect to end stations. In general,
MDI
means connecting to
another Hub or Switch while
MDIX
means connecting to a workstation or PC.
Therefore, Auto MDI/MDIX means you can connect to another Switch or workstation
without changing non-crossover or crossover cabling.
The 3-slot Modularized Fast Ethernet L2 plus + 2 Gigabit Copper / Mini-GBIC Combo
Managed Switch has 3 module slots. Users can purchase the modules on demand,
increasing elasticity of network application.
Features

Conforms to IEEE802.3 10BASE-T, 802.3u 100BASE-TX/FX, 802.3ab
1000BASE-T, 802.3z Gigabit SX/LX

3 slots for 8 ports 10/100TX, 8 ports 100Mbps multi mode fiber module, 8 ports
100Mbps single mode fiber module, or 8 ports 100Mbps SFP module

IEEE802.3x Flow control

Flow control for full duplex