35
4.1.2. M12 models
The supplied cable which one end is M12 8-pole connector and the other end is RS-
232 connector. Attach the end of RS-232 connector to PC or terminal and the other
end of M12 connector to the console port of the switch. The connected terminal or
PC must support the terminal emulation program.
4.2. Login in the Console Interface
When the connection between Device and PC is ready, turn on the PC and run a
terminal emulation program
or
Hyper Terminal
and configure its
communication
parameters
to match the following default characteristics of the console port:
Baud Rate:115200 bps
Data Bits: 8
Parity: none
Stop Bit: 1
Flow control: None
Содержание IWMR-3003
