2
Installation package
This unit can be installed by din-rail mounted or wall-mounted. Din-rail brackets and wall-mounted bracket are included.
Power and alarm relay connection
The PWR1 and PWR2 can be redundant with each other or you can use one of them to supply the switch.
The middle contact was designed for alarm relay connection.
Dip switch function
The SFP speed can be selected by switching the DIP switch.
LED indicator
Speed
ON
– 1000M speed is detected.
OFF
– 10M or 100M speed is detected
PWR1
ON -- when V1+, V1- is connected
6
ON
– port 6 SFP fiber is detected
OFF
– port 6 SFP fiber is not
detected.
Flashing
– port 6 SFP fiber is active
LNK /ACT
ON
—TX link is detected
OFF
– TX port is not detected
Flashing
– TX port is active
Din Rail Bracket x 1
6 pin Terminal Block x1
PWR2
ON -- when V2+, V2- is connected
FAULT
ON
–
connect only PW1 or PW2.
OFF-
both PW1 and PW2 are connected
5
ON
– port 5 SFP fiber is detected
OFF
–port 5 SFP fiber is not detected.
Flashing
– port 5 SFP fiber is active
1,2,3,4
ON
—PD is detected on designated
port.
OFF
– no PD is detected