14
Chapter 3 Hardware Installation
3.1Hardware installation
3.1.1Unpack switch and check the accessory with packing content list
3.1.2 Mount the switch on desired position. For the best ventilation, it is
suggested to mount the switch on metallic surface.
3.1.3 Connect the M12 connector of power input. The power supply for this
switch is connected via a 5-pole M12 female connector.
*May vary by
models. Please check the front panel of the switch.
Note:
Please check the power connector has been connected to the switch
correctly before you turn on the power resource.
Voltage of Power Input
Non-PoE model
24V model:
The power input voltage can be from
9V to 36VDC
PoE model
24V model:
The power input voltage can be from
9V to 36VDC to feed power on both the
802.3af and 802.3at standardized
devices.
*Please double check the power input range on the product label.
Please make sure that the external power supply unit you use to
provide the PoE voltage meet the following criteria:
The power consumption can satisfy the total power request from all
PD devices required.
