Lantech IPES-2208CA Скачать руководство пользователя

Страница: 82 / 146



802.1Q VLAN Setting:

Enable GVRP mode and define the Management VLAN ID.

GVRP (GARP VLAN Registration Protocol or Generic VLAN Registration Protocol)

is a protocol that facilitates control of virtual local area networks (VLANs) within a

larger network . GVRP conforms to the IEEE 802.1Q specification, which defines a

method of tagging frames with VLAN configuration data. This allows network

devices to dynamically exchange VLAN configuration information with other devices.



Port Setting:

Select the port you want to configure.



Link Type

: There are 4 types of link type.

1. Access Link:

A segment which provides the link path for one or more

stations to the VLAN-aware device.

An Access Port (untagged port),

connected to the access link, has an untagged VID (also called PVID). After

an untagged frame gets into the access port, the switch will insert a four-byte

tag in the frame. The contents of the last 12-bit of the tag is untagged VID.

When this frame is sent out through any of the access port of the same PVID,

the switch will remove the tag from the frame to recover it to what it was.

Those ports of the same untagged VID are regarded as the same VLAN group

members.

Note: Because the access port doesn

’t have an understanding of tagged

frame, the column field of Tagged VID is not available.

2. Trunk Link:

A segment which provides the link path for one or more VLAN-

aware devices (switches). A Trunk Port, connected to the trunk link, has an

understanding of tagged frame, which is used for the communication among

VLANs across switches. Which frames of the specified VIDs will be forwarded

depends on the values filled in the Tagged VID column field. Please insert a

comma between two VIDs.

Note:

A trunk port doesn’t insert tag into an untagged frame, and therefore the

untagged VID column field is not available.

It’s not necessary to type ‘1’ in the tagged VID. The trunk port will forward the

frames of VLAN 1.

Содержание IPES-2208CA



















































































































































Результаты поиска

Содержание IPES-2208CA

Отзывы:

Похожие инструкции для IPES-2208CA

Бренды по названию

Популярные бренды

Lantech IPES-2208CA, Руководство пользователя

Результаты поиска

Содержание IPES-2208CA

Отзывы:

Похожие инструкции для IPES-2208CA

Бренды по названию

Популярные бренды