Lantech IPES-2204F, Руководство пользователя

Страница: 41 / 75

35
5.10 System Alert - Relay Alarm
The Fault Relay Alarm function provides the Power Failure and Port Link Down/Broken
detection. With both power input 1 and power input 2 installed and the check boxes of
power 1/power 2 ticked, the FAULT LED indicator will then be possible to light up when
any one of the power failures occurs. As for the Port Link Down/Broken detection, the
FAULT LED indicator will light up when the port failure occurs; certainly the check box
beside the port must be ticked first. Please refer to the segment of
‘
Wiring the Fault
Alarm Contact
’ for the failure detection.

Power Failure Setting: Tick the check box to enable the function of lighting up the
FAULT LED on the panel when power fails.

Port Link Down/Broken Setting: Tick the check box to enable the function of
lighting up FAULT LED on the panel when Ports
’ states are link down or broken.
Fault Relay Alarm interface
6.8.1 System Alert - SMTP
Simple Mail Transfer Protocol (SMTP) is the standard for email transmissions across the
network. You can configure the SMTP server IP, mail subject, sender, mail account,
password, and the recipient email addresses which the e-mail alert will send to. There
are also five types of event
—Device Cold Start, Authentication Failure, X-Ring Topology
Change, and Port Event
—available to be issued as the e-mail alert. Besides, this