18
Check if the DIN-Rail is tightened on the track or not.
To remove the industrial device from the track, reverse above steps.
2.3. Wall Mount Plate Mounting
Follow the steps below to mount the industrial device with wall mount plate.
1. Remove the DIN-Rail from the industrial device; loose the screws to remove the DIN-
Rail.
2. Place the wall mount plate on the rear panel of the industrial device.
3. Use the screws to screw the wall mount plate on the industrial device.
4. Use the hook holes at the corners of the wall mount plate to hang the industrial
device on the wall.
5. To remove the wall mount plate, reverse the above steps.
NOTE : Wall mount kits are optional accessories
Содержание IMR-3003
