Lantech IES-22812F-2P, Руководство пользователя

Страница: 101 / 154

the 2
nd
Ring Port to be the working port.
„
Enable Couple Ring: To enable the coupe ring function, tick the checkbox
beside the Enable Couple Ring string label.
¾
Couple Port: Assign the member port which is connected to the other ring
group.
¾
Control Port: When the Enable Couple Ring checkbox is ticked, you have
to assign the control port to form a couple-ring group between the two X-
rings.
„
Enable Dual Homing: Set up one of the ports on the switch to be the Dual
Homing port. For a switch, there is only one Dual Homing port. Dual Homing
function only works when the X-Ring function enabled.
„
And then, click
Apply
to have the configuration take effect.
X-ring Interface
[NOTE] 1. When the X-Ring function enabled, the user must disable the RSTP.
The X-Ring function and RSTP function cannot exist on a switch at the
same time.
2. Remember to execute the “Save Configuration” action, otherwise the
new configuration will lose when switch powers off.
94