Lanta Fireball Par64S Plus, Руководство пользователя, Страница: 7 / 12

© Lanta Lighting™ 2016. Terms Apply. All trademarks are the property of their
respective owners. E&OE. All specifi cations and details are correct at time of print.
January 16
Fireball Par64S Plus Owner Handbook ™
2 - AUTO Mode
To use the built-in Auto mode – a library of exciting colour changes, keep pressing the
“MODE” button until the LED display shows “AUTO”. In this mode the unit will run pattern
two for a period of time, then automatically run pattern three and so on until pattern ten
is reached. It will then restart with pattern two. This creates an ever-changing light show
without the need for the operator to intervene.
Note: The special effects shown in (1) and (2) can be selected.
3 - DMX Mode
It is possible to operate the Lanta Fireball Par 64S Plus™ from a remote location by using
either a DMX controller or a PC or laptop with a DMX interface. Lanta products use a 3
pin XLR style connector and usually have an input and output DMX connector. This allows
multiple lighting products to be “daisy-chained” together to build a display controlled by
just one cable back to the DMX controller.
NOTE: In larger installations, there may be limitations regarding the maximum length of
DMX cables and the maximum number of devices that can be used in one daisy-chain
(or node).
NOTE: It is often desirable to terminate the last device on the node to minimize noise
and interference. Interference on a DMX network can make some lighting products to
behave erratically; this is most noticeable with moving head or other motorized products.
This is not a fault with the lighting product.
Please see your DMX controller handbook for further details.
To use the built-in DMX function, it is necessary to set the DMX address. To do so, fi rst
choose the correct mode by pressing the “MODE” button until the LED display shows
“d” followed by a 3-digit number (e.g. d007). The “UP” and “DOWN” buttons allow the
selection of the DMX address and can be selected between 001 and 512.
The Lanta Fireball Par 64S Plus™ uses several adjacent CHANNELs of DMX and the fi rst
will be determined by the DMX address setting - as described above - and the second
CHANNEL will be one CHANNEL higher and so on. E.g. if the DMX address has been
set to 105, then the Lanta Fireball Par 64S Plus™ will be operated by channels 105 and
106 etc. In most applications, it is suffi cient to set the DMX address to 001 as shown in the
table overleaf.
When the Lanta Fireball Par 64S Plus™ is connected to the DMX controller, each CHANNEL
will be controlled by a slider or similar control. When the slider is at the bottom the VALUE
is 0. When the slider is at maximum, the VALUE is 256. The value can be set at any level
at any time.