Owner Handbook
Aurora Bar X44
™
4
© Lanta Lighting™ 2006-2011. Terms Apply. All trademarks are the property of their respective owners. E&OE. All specifications and details are correct at time of print.
Revision 1
operating modes
There are distinct operating modes that are supported by this unit. To select,
use the “MODE” button to enter the menu. The “SETUP” button steps through
specific settings for each operating mode and the “UP” and “DOWN” buttons
chooses from the values available.
in Built programs
p r X X
Press “Mode” Button until the display reads PRXX
Press the “Up” or “Down” buttons to select programs PR.01 – PR.09
led display shows
effect
P01
Static Colours
P02
RGBYCPW Fade Through Black
P03
RGB Fade Through Black
P04
RGBYCPW Jump
P05
RGB Jump
P06
RGBYCP Fade
P07
RGBYCPW Fade
P08
Red Fade
P09
Green Fade
stroBe & speed
S P X X
f s X X
There are additional functions available to the user within the built in programs
Between PR01 – PR10 both the strobe and speed of the program can be
adjusted. Whilst on a program, press the “SETUP” button once which will show
“SPXX” By pressing the up and down buttons you can adjust the speed of
the program. By pressing the “SETUP” button for a second time the display will
show “FSXX”. By pressing the Up and Down buttons you can adjust the strobe
frequency of the program.
static colour
c o l 1
c o l 2
static colour on single Fixture
Press the “Mode” button until the display shows “COL1”. Press the “Setup” until
the display shows “1.XXX” (RED 1) Press the up or down button to adjust the
Brightness. Repeat this step to alter the brightness of the other colours “2.XXX”
(Green1) “3.XXX” (Blue1) “4.XXX” (Red2) “5.XXX” (Green2) “6.XXX” (Blue 2)
static colour on whole unit
Pres the “Mode” button until the display shows “COL2”. Press the “Setup” until
the display shows “1.XXX” (RED) Press the up or down button to adjust the
Brightness. Repeat this step to alter the brightness of the other colours “2.XXX”
(Green) “3.XXX” (Blue)
auto run mode
a u t o
Press the “MODE” until the display shows “AUT”. The fixture will auto run between
built in programs PR02 – PR10.
auto
MODE SETUP
UP
DOWN
slave mode
s l a v
Press the “MODE” until the display shows “SLA” to enter into Slave mode.
additional inFormation
To prevent unauthorised use of the fixture, after 20 seconds of none activity the
fixture will self lock. To unlock the fixture press the “MODE” & “DOWN” Buttons
together for 2 seconds. You will then be able to access the full functions of the
Fixture.
selF protection
During long spells of operation on full power, the fixture will adjust the power
consumption to increase the dissipation of heat. Please ensure the fixture is well
ventilated when in use on full power for long spells.
dmx mode
8. 0 0 i
Press the “MODE” button until the display shows “d.001”. Press the “UP” and
“DOWN” buttons to set the individual DMX value between d.001 - d.512.
To select the number of channels, Press the “SETUP” button, then the “UP” and
“DOWN” buttons to cycle through the number of DMX channels you require.
led display shows
dmx control mode
5-ch
5 Channel
8-ch
8 Channel
9-ch
9 Channel
5 C H
channel
value
Function
CH1
0-255
MASTER DIMMER
CH2
0-255
RED
CH3
0-255
GREEN
CH4
0-255
BLUE
CH5
0-255
STROBE
8 C H
channel
value
Function
CH1
0-255
MASTER DIMMER
CH2
0-255
RED 1
CH3
0-255
GREEN 1
CH4
0-255
BLUE 1
CH5
0-255
RED 2
CH6
0-255
GREEN 2
CH7
0-255
BLUE 2
CH8
0-255
STROBE
