LANSCHE AUDIO
OPERATING INSTRUCTIONS No.5.1
Page 10 / 18
reverberation, which make the music sound bright and diffuse. In contrast, a heavily damped room
with a lot of furniture and many soft surfaces produces more of a dark, lifeless sound impression.
Depending on the design of the room and the positioning of the speakers, the influences of furniture,
curtains, and other objects can very negatively affect the quality of your listening experience.
Model No.5.1 can be adjusted to the acoustic properties of the room where it is employed or to
particular positioning restrictions. For this purpose there are two jumpers on the rear panel of the
speakers for adjusting the bass and treble response.
2.5.1. Adjusting the bass response (13)
The bass response is selectable via a jumper to be either 0dB @ 32Hz or -3dB @ 100 Hz
To select a different bass response pull out the jumper located on the rear panel
(6)
. and
reinsert it in to the desired position, as shown below.
2.5.2. Adjusting the treble response (14)
The level of the Corona plasma tweeter can be adjusted in 1dB steps via a jumper. In the 0dB
position, the tweeter produces a flat frequency response in an ideal room.
You should listen to your speakers in this default setting for a few hours in order to become
accustomed to the sound.
To select an alternate tweeter level pull out the jumper and reinsert it in to the desired
position, as shown below on the rear panel
(6)
.
