AP-952X
Industrial Wall-mounted Wireless-N/BG AP/Bridge
User's Manual
13
3.1.3 Hardware Installation
Please follow the steps mentioned below to install the hardware of AP-952X
1. Place the AP-952X at a best location.
The best location for AP-952X is usually at the center of your wireless network.
2. Connect AP-952X to your outbound network device.
Connect one end of the Ethernet cable to the LAN port of AP-952X on the front panel and the other end of the cable
to a switch, a router or a hub. AP-952X is then connected to your existing wired LAN network. The LAN LED
indicator should be ON to indicate a proper connection.
3. There are two ways to supply power over to AP-952X
Connect the DC power adapter to the AP-952X power socket on the front panel.
Please only use the power adapter supplied with the AP-952X package. Using a different power adapter
may damage this system
Now, the hardware installation is completed.
To double verify the wired connection between AP-952X and your switch/router/hub, please check the
LED status indication of these network devices.
