The LP-P101 ticket printer has a LAN port underneath the unit. An Ethernet cable must be connected to
the LAN port either directly to the ROVER LP-ROV106 LAN port, or connected to the ROVER LAN port
through a switch.
The tablet computer or laptop that is used to control ticket printing will connect to the ROVER LP-ROV106
via the wireless network.
Connect your LP-P101 ticket printer to the ROVER LP-ROV106 Gateway Controller via a LAN port as
shown in the diagram of figure 1. An intermediate switch will be necessary to share the ROVER
LP-ROV106 LAN Port and connect wireless access points and the printer.
Connect your laptop computer to the LAN port of the ROVER gateway.
Printer Configuration
STEP 1:
Login as Admin
http://aplogin.com/admin
Open your computer browser and
login as ADMIN (see below). First
you must create a CODES login
password as this is the login used by
the print control computer (a tablet
or laptop).
Connect your computer to a LAN
port via an Ethernet cable. Open
your browser and type in the URL to
login to the Admin pages of your
gateway:
The username is admin, and the
password is the one that you
entered with the wizard. When the
page opens, select the Advanced
Settings> printer Setup page.
Please see the manual for more
information.
Next go to Advanced Settings >
Printer Setup, in the ADMIN menu.
Ensure that printer status is enabled
and then fill in the three fields of
data that will be printed together
with the code. Check the box to
print expiry time if required. Click
the update settings button. Return
to the printer setup page and click
the Print Test Page button and verify
that a ticket is printed.
Figure 2
Figure 3
www.lanpro.com