www.lanpro.com
Wireless - Equipment - LP-N24P - USER GUIDE
32
Manually enable or cancel ICS.
Q3: Failed to enable ICS.
A3: Microsoft ICS service can only combine one group of WAN and LAN. This message indicates ICS may have been enabled
by other network adapters.
1. Please manually cancel or restart and cancel ICS, then re-switch to AP mode.
2. This dialogue box appears because virtual wi-fi miniport adapter can only be used by one wireless network adapter at a
time. Please disable any other non-LanPro wireless network adapters and re-switch to AP mode.
Q4: Under Windows 7, when I switch from station mode to AP mode, the screen flashes “Disabling ICS, please wait……”and
immediately return to station screen.
A4: This is because you have disabled “Microsoft Virtual WiFi Miniport Adapter”, please re-enable it and then switch to AP
mode.
NOTE:
1. Under the WPS connection mode, when multiple routers simultaneously enable the WPS function, it may cause connection
failure.
2. If the router connect to the adapter using the WPS, only one client can be connected at one time, and so if the router
need to connect to multiple clients through WPS, you should repeat the WPS operation.
Appendix 3: FAQ
7
Q1: Microsoft ICS service is pending.
A1: If ICS service cannot be enabled after a long time, please re-switch from Station Mode to AP Mode, if not
successful, please restart the computer.
Q2:
ICS is already bound by another network device.
A2: Microsoft ICS service can only combine one group of WAN and LAN. This message indicates ICS may have
been enabled by other network adapters. Please manually cancel ICS and re-switch to AP mode.
