www.lanpro.com
Wireless - Equipment - 2.4 GHz - LP-N24, 123 Manual, PTP and MTP mode Installation
13
II.3
.7. Proceed to input the WLAN password in the field:
Pass Phrase and select: Apply, as shown in figure 35.
II.3
.8. In this step, we will change the IP address of
the LP-N24 of the B network. In order to do this, select:
Advanced Settings, LAN Settings, change the IP
address to: 192.168.0.2 (because there should not be
duplicate addresses when A and B get connected), select
now: Apply, as shown in figure 36.
Figure 35
Figure 36
II.3
.9. A new window will pop-up warning you to wait for a few minutes before accessing the system with the new IP
address. Select: Ok as shown in figure 37. Please wait for about 1 minute.
Figure 37
