www.lanpro.com
Wireless - Equipment - 2.4 GHz - LP-348 123 Manual in Client Mode
2
The following Instruction Manual will guide you on how to configure the LP-348 in Client Mode.
Figure 1
1
2
3
Once the Setup 123 Manual has been executed, proceed
to configure it by first connecting the UTP cable that comes
from the LP-348 to the To Odu port of the PoE Injector
furnished with the radio as shown in figure 1.
Connect an UTP cable from the To Ethernet
port of the
PoE injector to the Switch or PC as shown in figure 2.
Figure 2
4
Connect electric power to the PoE injector as shown in
figure 3.
Please go to your network card properties window and
select:
Internet Protocol
, then select:
Properties
, as
shown in figure 4.
Figure 3
Figure 4
