www.lanpro.com
Wireless - Equipment - 5.8 GHz - LP-289ai 123 Configuration Manual in Client Mode
2
This manual will help you configure the LP-289ai in Client Mode.
Figure 1
1
2
3
Once the 123 Setup Manual is executed, you can proceed
to configure the equipment by first connecting the cable
included in the box with the LP-289ai to the port:
To Odu
located in the PoE injector supplied as shown in figure 1.
Connect the port: To Ethernet to the switch or PC as
shown in figure 2.
Figure 2
4
Connect power to the PoE as shown in figure 3.
Please go to your NIC Card properties and select:
Internet Protocol, then select: Properties, as shown in
the window of figure 4.
Figure 3
Figure 4
