LP1522_M123_ENB01W
Check the box contentment.
Installation Point-to-Point, Multipoint
LP-1522
Access Point and 800mW Router,
with the standard 802.11b/g,
and with PoE technology and external antenna
123 MANUAL INItIAL coNfIgURAtIoN
Screw the antenna as you can see in
figure 2;
in case of having an antenna with pigtail
type cable, make sure that antenna cable is plugged into the antenna and then screw the
other end into your SMA connector of your LP-1522.
See figure 3.
Note: Never operate
the LP-1522 without the antenna, because you will damage the Rf output stage.
Connect the DC electrical power plug into the power jack,
see figure 5.
The
LP-1522 can be fed alternatively through a LAN port simultaneously with DATA.
For this, you must use a LP-PoE150
(*)
injector on the side of your Switch or
PC and send Data+Power to the LP-1522 up to 100m distance with our new
LP-cE
Cat5e or
LP-c6
Cat6 copper UTP cables and 80m distance with LanPro
LP-BMcAt5E
bi-metallic UTP Cable,
see figure 6.
(*) the LP-PoE150 Injector is not included.
Connect your PC or Switch to the LAN port of
your LP-1522, as it is shown in Figure 4.
1
2
3
4
figure 1
figure 2
figure 4
figure 5
1
figure 3
figure 6
(*) the
LP-PoE150
Injector
is not
included.
www.lanpro.com
