1 3 7
6
Multiple GPUs
CrossFire Setup
1. Power-off the system and monitor then unplug the power cord.
2. Remove the screw of the bracket that is opposite the PCIE 1
and PCIE 4 slots then remove the brackets.
Note:
•
Uninstall all existing graphics card drivers before installing
the ATI CrossFireX graphics cards.
•
Use identical ATI CrossFireX graphics cards.
•
The system board used in the following illustrations may not
resemble the actual board. These illustrations are for refer-
ence only.
PCIE 1
PCIE 4
