3.1
3
Battery Instructions
3.2
4
5
Scenario 1
Scenario 2
NOT OK
Scenario 3
Scenario 4
(with extender tube)
OK
(with extender tube)
OK
*Please note that the nominal voltage of the gimbal is 7.4V
Each 18350 & 18650 battery is 3.7V. Therefore, the gimbal MUST operate on a
maximum of TWO batteries.
Batteries must be combined as per below scenarios:
Battery installation:
Unscrew the battery compartment cap and install two 18350 batteries; or add the handle
extender and install two 18650 batteries (install the positive end first)
NOT OK
Extending the tube to
install 2pcs 18650 batteries.
Make sure to attach extender before
installing the 18650 batteries.
Handle extender
*Ensure that the pins are in contact
with each other before tightening the locking knob.
*Same process to
connect the wired control cable
Turn clockwise
to lock
Turn counter
clockwise to open
Gimbal Installation
Gimbal Installation
Align the contacts on the
handle and gimbal head and align
white dots and turn clockwise.
