www.lanoptik.com
- 5 -
User's Manual | Microscope Camera MC500W-G2 / MC4KW-G2 Series
③
Power lamp
High power: green light
Low power: red light
No power: the device turns to power off state after 30 times of red light flashing.
You need to reset the button for new work.
When red light flashes, work can be done under charging mode.
④
WiFi lamp
The WiFi indicator is on when in wireless working mode,
When the output signal is 2.4G WiFi, the WiFi indicator is blue.
When the output signal is 5G WiFi, the WiFi indicator is green.
Note: the default WiFi output signal is 5G WiFi.
The switch of 2.4G and 5G signals can be achieved by pressing the WiFi signal switching port (1-3
seconds).
⑤
Toggle key
：
Toggle left(switch Icon): shut down.
Toggle middle
（
USB Icon)
：
PC enable.
Toggle right (WiFi Icon)
：
wireless WiFi enable.
Divided into Three states
：
⑥
USB Type-C port
Charge the WiFi Digital Camera is connecting adaptor with USB Cable;
Connect PC with USB Cable, and turn on the USB Cable work mode, Camera will start wired working.
⑦
Antenna
External antenna for WiFi signal.
⑧
Quick mounting screw hole
It has ¼ inch threaded port at the bottom, and it can be directly locked on the tripod.
⑨
C-mount thread
Make the camera can be installed to a standard C-mount microscope or spotting scope; or a different
interface microscope with adapter (optional accessory).
（
For detailed specifications, please refer to
Chapter 5
）
⑩
Dustproof Cover
Screw it out before use for dust prevention and chip protection.
