Lanner NCA-6520, Руководство пользователя

Страница: 29 / 141

NCA-6520 User Manual
29
Installing the CPU
Please note that the system delivered to you includes the heatsink and processor. This processor comes with
a rather sophisticated design, therefore, the assembly of which must be handled with exclusive tools and
extreme care by professionals. Please read through the instructions in this section and refer to the
official
tutorial released by Intel® to make sure you have acquired the necessary knowledge and comply with the
requirements.
Installing the processor onto the motherboard involves two stages:
1. Mount the processor onto the heat sink to make a PHM (Pro Heat Sink Module)
2. Install the PHM onto the motherboard.
Tools Required
Note : The images of tools shown in this document are merely for reference; the actual tools you use might
differ.
Parts Explanation:
Tool Description
(T-30 Torx Bit
©
)
Set to 8in/lb for tightening the nuts which
fasten the PHM on the bolster plate.
ESD Protection
(ESD gloves, ESD-safe
work surface, ESD-safe
shoes, grounded wrist
strap etc.)
During the entire assembly process, at
least wear a pair of ESD gloves to avoid
damaging or contaminating the electronic
parts while enhancing your own safety.
Item Description
Processor
Please avoid touching the gold fingers or
package lands of the processor even if you are
wearing ESD gloves.