Lanner NCA-5710 Скачать руководство пользователя страница 60

Страница: 60 / 132

Chapter 3: Software Setup

Trusted Computing (TPM1.2)

Feature

Options

Description

Security Device

Support

Enabled

Disabled

Enables or disables BIOS support for security device.
By disabling this function, OS will not show Security
Device. TCG EFI protocol and INT1A interface will not
be available.

TPM State

Enabled

Disabled

Enables or disables Security Device.

Pending

operation

None

TPM Clear

Schedules an Operation for the Security Device.

Device Select

TPM 1.2
TPM 2.0

Auto

TPM 1.2

will restrict support to TPM 1.2 devices; while

TPM 2.0

will restrict support to TPM 2.0 devices;

Auto

will support both with the default set to TPM 2.0
devices. If not found, TPM 1.2 devices will be
enumerated.

Note

Your computer will reboot during restart in order
to change state of the device.

Note

Your computer will reboot during restart in order
to change state of the device.

Содержание NCA-5710





































































































































Результаты поиска

Содержание NCA-5710

Отзывы:

Lanner NCA-5710, Руководство пользователя, Страница: 60 / 132

Результаты поиска

Содержание NCA-5710

Отзывы: