LWR-X8460 User Manual
12
The access point can be mounted on a flat surfaced wall. Please take the following into considerations when
mounting the system onto the wall.
1. Fix the wall mount brackets onto the bottom of the access point by securing them with the four (4)
provided screws.
2. Position the access point
’
s mounting bracket at
the desired location on the wall and use a
pencil/pen to mark the four mounting holes.
3. Drill four (4) holes, insert wall anchors, then insert
screws into the wall anchors, leaving 3/16 inch (0.5
cm) of each screw exposed
4. Align the access point
’
s wall-mounting holes with
the screws and mount your access point to the wall.
