background image

Overview

Icon Descriptions

The icons are used in the manual to  serve as an 

indication of interest topics or important messages. 

Below is a description of these icons:

NOTE:

 This check mark indicates 

that there is a note of interest and is 

something that you should pay special 

attention to while using the product.

 

WARNING:

 This exclamation point 

indicates that there is a caution or 

warning and it is something that could 

damage your property or product.

Online Resources

The listed websites are links to the on-line product 

information and technical support.

Resource

Website

Lanner

http://www.lannerinc.com

Product Resources http://assist.lannerinc.com

RMA

http://eRMA.lannerinc.com

Copyright and Trademarks

This document is copyrighted, © 2014. All rights are 

reserved. The original manufacturer reserves the right to 

make improvements to the products described in this 

manual at any time without notice.
No part of this manual may be reproduced, copied, 

translated or transmitted in any form or by any means 

without the prior written permission of the original 

manufacturer. Information provided in this manual 

is intended to be accurate and reliable. However, the 

original manufacturer assumes no responsibility for its 

use, nor for any infringements upon the rights of third 

parties that may result from such use.

Acknowledgement

Intel, Pentium and Celeron are registered trademarks of 

Intel Corp.
Microsoft Windows and MS-DOS are registered 

trademarks of Microsoft Corp.
All other product names or trademarks are properties of 

their respective owners.

Compliances and Certification

CE Certification

This product has passed the CE test for environmental 

specifications. Test conditions for passing included 

the equipment being operated within an industrial 

enclosure. In order to protect the product from being 

damaged by ESD (Electrostatic Discharge) and EMI 

leakage, we strongly recommend the use of CE-

compliant industrial enclosure products.

FCC Class A Certification

This equipment has been tested and found to comply 

with the limits for a Class A digital device, pursuant 

to Part 15 of the FCC Rules. These limits are designed 

to provide reasonable protection against harmful 

interference when the equipment is operated in a 

commercial environment. This equipment generates, 

uses and can radiate radio frequency energy and, if not 

installed and used in accordance with the instruction 

manual, may cause harmful interference to radio 

communications. Operation of this equipment in a 

residential area is likely to cause harmful interference 

in which case the user will be required to correct the 

interference at his own expense.

e Mark Certification

E13 - Luxembourg

Содержание LVC-2001











































Отзывы: