Lanner LVC-2000, Руководство пользователя

Страница: 16 / 39

Jumper Settings
JCMOS1 (Clean CMOS)
:
This jumper is used to erase data in CMOS. To clear CMOS,
first turn off your system and unplug power source. Then,
by placing the cap on pin 2 and 3 (short pin 2-3), this
jumper can erase the system settings stored in CMOS
memory.
Pin Description
Short 1-2 Normal (default)
Short 2-3 Clear RTC
SW1: Function Select
Default Pin 1&2 ON; Pin 3&4 OFF
Pin Status Description
1 ON/ OFF MIO_COM5_RX
2 ON/ OFF MIO_COM5_TX
3 ON/ OFF MIO_COM_RXD
4 ON/ OFF MIO_COM_TXD
JMCU1: Programming the MCU
Pin Description
Short 1-2 Normal (default)
Short 2-3 Program MCU
1
1 2 3 4
1
Connectors
VGA (VGA1)
Pin Signal Pin Signal Pin Signal
1 RED 6 GND 11 N/A
2 GREEN 7 GND 12 DDC DAT
3 BLUE 8 GND 13 VGA_HS
4 N/A 9 V5S_VGA 14 VGA_VS
5 GND 10 GND 15 VGA_CLK
HDMI (HDMI1)
Pin Description Pin Description
1 HDMI_DATP2_P 2 GND
3 HDMI_DATP2_N 4 HDMI_DATP1_P
5 GND 6 HDMI_DATP1_N
7 HDMI_DATP0_P 8 GND
9 HDMI_DATP0_N 10 HDMI_CLK_P
11 GND 12 HDMI_CLK_N
13 N/A 14 N/A
15 HDMI_DDC_CLK 16 HDMI_DDC_DAT
17 GND 18 V5S_HDMI
19 HDMI_HPD
USBF1 (USB0,1)
Pin Description Pin Description
1 V5S_USB0 6 USBDN1
2 GND 7 USBDP0
3 N/A 8 N/A
4 USBDP1 9 GND
5 USBDN0 10 V5S_USB1
15 14 13 12 11
5 4 3 2 1
1
5