Lanner LEC-2260A, Руководство пользователя

Страница: 16 / 30

15
Board Layout
Chapter 3
Embedded and Industrial Computing
DVI-D Connector (DVID1) : A single link DVI-D Connector
Pin No. Description Pin No. Description
1 dATA_2N 2 dATA_2P
3 GNd 4 NC
5 NC 6 ddC_CLK
7 ddC_dAT 8 NC
9 dATA_1N 10 dATA_1P
11 GNd 12 NC
13 NC 14 +5V
15 GNd 16 HPd
17 dATA_0N 18 dATA_0P
19 GNd 20 NC
21 NC 22 GNd
23 CLK_P 24 CLK_N
VGA (VGA1)
Pin signal Pin signal Pin signal
1 REd 6 CRT dET 11 N/A
2 GREEN 7 GNd 12 ddC dAT
3 BLUE 8 GNd 13 HsYNC
4 N/A 9 VCC5 14 VsYNC
5 GNd 10 GNd 15 ddC CLK
Note:
The driver for the VGA and Audio ports
should be installed with the following order:
Chipset INF->Graphic->Audio
Reset Button (RST1)
Pin NO. description
1 RsT_BTN
2 GNd
3 GNd
4 N/A
DC_IN CONNECTOR (CN1) : A Phoenix connector for
external power supply.
Power Button (PBT1) : Power button with dual LEDs
Digital Input/Output Connector (CN2) : The 8 pins of
General Purpose Input/Output (GPIO) support input and
output operations through the DB-9 female connector.
LAN1/LAN2 Ports (LAN1/LAN2)
: The LAN ports are
provided by Intel 82574L Ethernet controller whose
interface complies with PCI-e 1.1 (2.5 Ghz). It has advanced
management features including IPMI pass-through via
SMBus or NC-SI, WOL, PXE remote boot, ISCSI boot and
VLAN filtering.
15 14 13 12 11
5 4 3 2 1
1
3
2
4
Pin No. Pin Name
1 PWR_BTN_N
2 PWR_BTN_N
3 GNd
4 GNd
L1 PWR_sW_P
L2 PWR_sW_N
Pin No. Description
Fast Ethernet Gigabit Ethernet
1 TX+ BI_DA+
2 TX- BI_DA-
3 RX+ BI_DB+
4 -- BI_DC+
5 -- BI_DC-
6 RX- BI_DB-
7 -- BI_DD+
8 -- BI_DD-
TTL Level is +5V; Maximum input current for
each port is 10mA; Maximum output current
for each port is 100uA
Input/Output Voltage Logic Register
0~2V Low 0
2~5V High 1
9 8 7 6
5 4 3 2 1
Pin No. Pin Name Pin No. Pin Name
1 IN0 6 OUT0
2 IN1 7 OUT1
3 IN2 8 OUT2
4 IN3 9 OUT3
5 GNd
Pin No. Pin Name
1 dC_GNd
2 dC_IN
1 2