HTCA-6310S User Manual
19
Internal Jumpers
The pin headers on the motherboard are often associated with important functions. With the shunt (Jumper)
pushed down on the designated pins (the pin numbers are printed on the circuit board, surrounding the
pin header), certain feature can be enabled or disabled. While changing the jumpers, make sure your
system is turned off.
To short the designated pins, push the jumper down on them so that they become
SHORT
. To make the
pins setting
OPEN
, simply remove the jumper cap.
2-pin Header
3-pin Header
4-pin Header
Open Short
Open (1-2) Jumped
Open (1-2) Jumped
J27:
Software reset
Select
SW3
reset option
OPEN2:
Management Port select Pin header
JCMOS1:
Clear CMOS
Jumper
You may set jumper pins to clear CMOS
Pin
Description
1-2
Hardware Reset
2-3
Software Reset
Pin
Description
Close
IPMI card
Open
On board I210
Pin
Description
1-2
Normal (Default)
2-3
Clear CMOS
1
2
1
2
3
4
1 3
2
1
2
